With easy-to-configure control for up to 8 stations, including 3 programs and 4 start times each, the X-Core is the perfect solution for residential applications. Plug in the revolutionary Solar Sync ET sensor and the X-Core is converted into a “smart controller,” that regulates irrigation runtimes based on locally measured weather.
Step 1: Set The Current Time. First, you will want to ensure that the current time is correct. If the current time is not accurate, it means that all of your other settings will be incorrect as well. Turn the dial on your system to “Current Time/Day”. Adjust the flashing numbers using the plus and minus buttons, and then use the left and
A Hunter weather sensor or other micro-switch type weather sensors can be connected to the X-Core®. The purpose of this sensor is to stop automatic watering when weather conditions dictate. 1.Remove the metal jumper plate that is attached across the two SEN terminals inside the controller. 2.
Press the plus (+) or minus (-) button to select the number of days between watering days (from 1 to 31 days). When the interval starts depends upon what time of the day you set the interval and what time you set the start time. The X-Core does not show you days left on Interval. With this option, you can select interval watering from 1 to 31
X-Core - Reset / Clearing the Controllers Memory. Reset a Hunter Controller - Quick Tip. Watch on. Press and hold the button. While holding the button, press the RESET button for 3 seconds then release while continuing to hold the button. Continue holding the button until the display shows 12:00am or "DONE".
In this video I show you how to set, change, and remove the start times on the Hunter X-Core. If you want to set a new start time, or change a start time thi
LHeKiVB. 3ty7zjv9os.pages.dev/1153ty7zjv9os.pages.dev/2213ty7zjv9os.pages.dev/1003ty7zjv9os.pages.dev/3463ty7zjv9os.pages.dev/1553ty7zjv9os.pages.dev/763ty7zjv9os.pages.dev/3123ty7zjv9os.pages.dev/2473ty7zjv9os.pages.dev/102
hunter x core manual start
